This website uses Cookies to provide a better user experience. By continuing to use the site you are consenting to their use.

You may change your Cookie settings in your browser.

uv oiled engineered wood flooring british manufacturer

 

Our engineered wooden flooring is supplied untreated as standard ( bare sanded floorboards). The finish you choose is therefore the most important consideration; Hard Wax Oil, Lacquer or UV Oil ? All of our engineered wood flooring in the picture of our Somerset showroom above is finished with UV Oil.

UV Oil is a specialist oil-based melange, which enables UV curing in less than sixty seconds through our Ultra-Violet rollercoater. Our UV Oils are hybrid finishes with amazing coverage and formulated with a low gloss level  for a subtle low-sheen finish. This lack of sheen is good news when it comes to dents, dinks and scratches. With UV Oil finishes, less is more. Because the finish is thin and flexible, it is able to take impacts & conform to mishaps. The finish is left intact to continue protecting the wood, rather than chipping or flaking away.

Like Hard Wax Oils and lacquers UV cured oil needs periodic maintenance depending on levels of traffic experienced.

 

 

UV Oil technology is an area in which ladies are fully-versed. Ultraviolet nail-drying systems, are standard in nail salons worldwide so it makes sense that engineered wood flooring manufacturers would adopt the same science. These hybrid finishes combined with Ultra Violet curing give engineered wooden floors uber resistance to wear and tear and available in varying degrees of sheen  - matt /  low lustre being the flavour of the month.

 

 

 

 

Contact Info

Woodflooring Engineered Ltd

The Old Basket Works

Lyng Road

Burrow Bridge

Somerset

TA7 0SG

01823 698533

Email Us Here