Specification for Band-Sawn Ash Engineered Flooring

Our engineered Band-Sawn Natural White Ash Flooring is 20mm thick

Engineered Band-Sawn Natural Ash flooring has a 5 mm Solid American White Ash  wear-layer / top-layer

Engineered Band-Sawn Natural Ash flooring has a 15mm Birch Plywood substrate.

Tongue & Groove engineered Ash flooring on all 4 sides.

Engineered Band-Sawn Natural Ash flooring is machined with a micro-bevel as standard (long sides).

Square-shoulder engineered Band-Sawn Natural Ash flooring is available on request.

Engineered Band-Sawn Natural Ash flooring is available in fixed widths : 220mm, 240mm or 260mm

Engineered Band-Sawn Natural Ash floorboard lengths are typically 2400mm this may vary upon timber availability, but expect some shorter lengths in a pack.

Engineered Band-Sawn Natural Ash flooring is supplied as standard pre-stained & UV Oiled . Please contact us for a pricing for pre-stained only flooring - i.e. to apply your chosen finish / sealant once installed (i.e. hard wax oil or lacquer )..

As with all of our luxury hardwood engineered tongue and groove flooring , Band Sawn Natural Ash can be used structurally - i.e. fixed directly to floor joists.

Engineered Band-Sawn Natural Ash flooring is suitable for use with all types of under floor heating systems.

Engineered Band-Sawn Natural White Ash flooring prices are per square metre and exclusive of V.A.T.