This website uses Cookies to provide a better user experience. By continuing to use the site you are consenting to their use.

You may change your Cookie settings in your browser.

suppliers somerset of flexible engineered wood flooring adhesive

 

Flexible Wood Flooring Adhesive

Bona R848 Adhesive. Perfect for installing parquet flooring or engineered wood flooring. Suitable substrates include concrete, plywood, cork, particle or chip board, stone, ceramic, terrazzo, radiant heat flooring (refer to manufacturer's recommended installation instructions) and dry, above-grade gypsum underlayments. This product may be used for glue assisted installations. Excellent initial "green grab" means the flooring stays in place, causing practically no swelling of the wood. With it's GreenGuard indoor air quality certification, it's water and solvent-free, meaning no strong odours.

 

Please be advised that this product is NOT for use in the following situations:

  • On wet, contaminated or friable surfaces
  • Over concrete curing compounds, sealers or other surface treatments that could affect adhesion
  • On areas subject to hydrostatic head
  • On cutback residue, or over vinyl / VCT
  • On chemically treated woods
  • As a levelling compound

 

Induro® XLO Natural Floor Oil

taunton supplier of morrells wood finishes british manufacturer engineerd wood flooring

 

 

These oils are formulated with a blend of urethane and natural oils for use on all types of untreated solid and engineered wood flooring, and parquet. They produce a smooth, natural finish with excellent resistance against water and other household liquids. Oiled finishes are easily and quickly maintained with additional coats once tired.

Product Codes

induro® XLO 30% sheen clear oil 5L £96.00 + V.A.T.
induro® XLO 30% sheen clear oil 25L £48.00 + V.A.T.
induro® XLO 10% sheen clear oil 5L £96.00 + V.A.T.
induro® XLO 10% sheen clear oil 25L £48.00 + V.A.T.
  • Tin Size: 2.5 Ltr  or 5Ltr
  • Dry and Re-Coat: 3 - 4 hours each for clear oils, 4 - 6 hours each for pigmented oils.
  • Traffic: light - high traffic with good maintenance.
  • Coverage: 40 - 60m² per 5 litres dependent upon the application method, and absorbency and surface quality of the timber being coated.
  • Preparation Application

    Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturers instructions on the tin at all times. Keep rooms well ventilated.

    The surface of the timber should be clean, dry and free from any surface contaminants such as grease, oil and dirt. All previous finishes should be removed by sanding.

  •  

    Application

    Apply oil with a short haired roller, T-bar applicator, trowel or natural bristle brush at a rate of 80mls/m2

    1. Allow to dry for 3-4 hours.
    2. Lightly abrade with a red pad on a rotary floor buffing machine.
    3. Apply second coat of oil and allow to dry for 3-4 hours.
    4. Apply further coats as necessary, with a light de-nibbing between coats to aid adhesion and improve the final finish.

    A natural finish is normally achieved with 2-3 coats.

  • Aftercare

    To maintain the surface finish and its protective properties, re-apply one coat of Morrells Induro XLO Natural Parquet Floor Oil, as and when required, with a light abrade before application.

 

Please contact us for more information / data sheets

 

Contact Info

Woodflooring Engineered Ltd

The Old Basket Works

Lyng Road

Burrow Bridge

Somerset

TA7 0SG

01823 698533

Email Us Here